Table of Contents
Advertisement
This feature provides a method of indexing the starting
point so that it can be easily returned to in either fast
forward or rewind mode.
• The index mark will be made automatically when the
RECORD button is pressed. It will also be marked at
the starting point of Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL
button is pressed and released during recording.
• The time gap between making the index marks on the
tape should be greater than 1minute for SP recording,
2 minutes for LP recording and 3 minutes for SLP
recording.
Example:
You
are
watching program num-
ber 4 and want to fast
forward
to program
number
7. You must
skip three programs.
CURRENT
PLAYBACK
PROGRAM
Beginning
of tape
_
End
of tape
Pro1
Pro2
Pr03_
Pro5
P¢06
P_7
4
3
2
1
1
2
3
INDEX
MARK
1 Select "INDEX SEARCH" mode
Press INDEX SEARCH
button.
2 Enter your desired number
Press CHANNEL • or • button
(,,,,=_,,_,
)
repeatedly
until the number of
|"_°_,=
J
programs that you want to skip
L
appears. (Example:
"03" for 3
programs)
3
Begin Index Search
Press REWIND or F.FWD button. The VCR begins re-
winding or fast forwarding to the beginning of desired
program.
Note: Every time an index signal is skipped, the number
in the program indicator decreases by one.
4
After Index Search
When the preset program is reached, the VCR will start
playback automatically.
NOTES:
• Index Search can be set up to 20.
• This function will not operate in recording mode.
• Procedures
must be followed within 30 seconds.
from steps [1] to [2]. Otherwise the Index Search
mode will be cancelled.
• Press STOP button to exit the Index Search mode.
This function
enables
you to search for the unrecorded
portion of the tape in the forward
direction.
• Tape must be fully rewound.
1 Select "BLANK SEARCH" mode
Press BLANK SEARCH button.
The VCR begins fast forwarding
to the beginning of the blank part
of the tape.
r
BLANKSEARCH
2
After Blank Search
The VCR will automatically
stop.
- 21 -
EN
6A12
Advertisement
Table of Contents
