Video Cassette Tapes; Cassette Loading And Unloading - Sears LXI series 580.55154490 Owner's Manual

Vhs video cassette recorder
Table of Contents

Advertisement

VIDEO CASSETTE TAPES
This VCR will operate with any video cassette which
has the
_
mark. The table shows the recording/
playback time of the available cassette when they
are used in the SP mode, LP mode and EP mode.
This VCR will not record in LP mode.
Cassette
Indication
T-60
T-120
T-160
SP Mode
1 hour
2 hours
2-2/3 hours
(60 minutes)
(120 minutes)
(160 minutes)
LP Mode
2 hours
4 hours
5-1/3 hours
(120 minutes)
(240 minutes)
(320 minutes)
EP Mode
3 hours
6 hours
8 hours
(180 minutes)
(360 minutes)
(480 minutes)
SAFETY
TAB
WHEN HANDLING
VIDEO CASSETTES:
• Do not expose video cassette to extreme
heat,
high humidity or strong magnetic fields.
• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.
• Always store an unused cassette in its case.
• Insert the cassette
into the VCR as illustrated
below with the label facing up (Arrow side up).
CASSETTE LOADING AND UNLOADING
LOADING
Hold the cassette with the arrow side up(top). Insert
the cassette
gently into the slot in the direction of
the arrow
(on the cassette)
until
the loading
mechanism automatically
pulls the cassette into the
unit. Make certain
that the cassette
is inserted
correctly.
UNLOADING
Press the STOP/EJECT
button twice. The cassette
will be ejected automatically.
After the cassette is
visible in the tape slot, pull it out to remove it.
Unloading
the cassette
is possible only when the
power cord is connected to the wall outlet.
Label (Arrow side up)
CST. IN Indicator
mum
NOTES:
• Do not force the cassette into the VCR.
• Insert the cassette gently.
• If the cassette is not loaded correctly, the VCR
will eject
the cassette
automatically
after
approximately 3 seconds.
• The cassette
indicator will light up when the
cassette is inserted and loaded correctly into the
VCR.
• The automatic
loading mechanism
will operate
only when the cassette is inserted correctly.
NOTES:
• The
cassette
indicator
goes
out when
the
STOP/EJECT button is pressed twice.
• The STOP/EJECT
button can be pressed during
any mode.
• Do not attempt
to pull out the cassette
once
automatic loading has started.
• The
cassette
can
be
ejected
when
the
STOP/EJECT
button
is pressed,
even
if the
VCR's power is OFF.
- 27 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents