GE Appliances PT925 Owner's Manual page 29

Electric self-cleaning convection built-in oven
Hide thumbs Also See for Appliances PT925:
Table of Contents

Advertisement

Available languages

Available languages

Before gou call for service...
6EAppliances.com
Troubleshooting Tips
gave time and moneg! Review the charts on the following
pages first and gou mag not need to call for service.
Possible Causes
What To Do
Oven light does
Light bulb is loose.
• Tighten or replace the bulb.
not work
Oven will not work
A fuse in gour home
• Replacethe fuse or reset the circuit breaker.
meg be blown or the circuit
breaker tripped.
Oven controls impropedg set.
. Seethe Using the oven section.
Oven too hot.
. Allow the oven to cool to below locking temperature.
Food does not bake
Oven controls impropedg set.
• Seethe Using the oven section.
or roast properly
Rack position is incorrect
• Seethe Using the oven section.
or the rack is not level.
Incorrect cookware or
. Seethe Using the oven section.
cookware of improper
size being used.
Oven thermostat needs
. Seethe AdJustthe oven thermostat Do it gourse!fl
adjustment,
section.
Food does not
Oven controlsimproperly set.
• Hake sure gou touch the BROIL HI/LO pad.
broil properly
Improper reck position
• Seethe Broiling Guide.
being used.
Cookware not suited
• Forbest results, use a pan designed for broiling.
for broiling.
The probe is plugged into
• Unplug and remove the probe from the oven.
the outlet in the oven.
In some areas the power
. Preheatthe broil element for 10 minutes.
(voltage) may be low.
• Broilfor the longest period of time recommended
in the Broiling Guide.
Oven temperature
Oven thermostat
• Seethe AdJustthe oven thermostat Do it yourself!
too hot or too cold
needs adjustment,
section.
Clock and timer
A fuse in gour home
• Replacethe fuse or reset the circuit breaker.
do not work
may be blown or the
circuit breaker tripped.
Oven controls improperly set.
. Seethe Using the clock and timer section.
Oven will not self-clean
The oven temperature is
. Allow the oven to cool and reset the controls.
too high to set a self-clean
operation.
Oven controls improperlg
set.
• See the Using the self-cleaning oven section.
The probe is plugged into
• Remove the probe from the oven.
the outlet in the oven.
29

Advertisement

Table of Contents
loading

Table of Contents