GE Appliances Profile JGB902 Owner's Manual & Installation Instructions page 15

Using the clock and timer.
Ill:t ....................................................
Not all features are on all models,
_t.arw.GEAppliances_com
,'" ,,i,, ,i,u ul, ,, ,i, ill
@
Make sure the clock is set to the
correct time of dayo
To Set the Clock
The clock must be set m dye co_rect time of
day for the automatic oven timing functions
to work properly. The time of day cannot
be changed during a timed b_ing or self-
cleaning cycle
[_
Touch dm CLOCK pad.
[_ Touch the number pads.
Touch dae number pads dae stone way you
read daem For example, to set 12:34, touch
fl_e number pads/, 2, 3and 4in daat order:
If number pads are not touched widfin one
minute 'after you touch d_e CLOCKpad, the
display reverts to dae original setting If dais
happens, touch dm CLOCK pad and reenter
d_e time of day.
[_ Touch dae START pad until ttle time of'
day shows in die display., This enters
dae time and starts the clock
Tocheckthe time of day when the display is
,showing o therinformation,simply touch the CLOCK
pad Thetime of day shows until anotherpad is
touched
The timer is a minute timer only.
The CLEAR/OFF p addoes not affect
the timer.
To Set the 77mer
Thetimer doesnot control ovenoperations.
Themaxtmumsetting on the timer is 9 hours
and 59 minutes.
[_ Touch die KITCHEN TIMER ON/OFF
pad
[_ Touch the number pads until fl_e
amount of time you want shows in dae
display..The maximum time that can
be entered in minutes is 59. Times
more d_an 59 minutes should be
changed to hou,'s and minutes For
example, to enter 90 minutes ,as1
hour 30 minutes, touch/, 3andO in
that ordm:
tf youmake a mistake° press theKITCHENTIMER
ON/OFF padandbeginagain
@
Touch dye START pad After pressing
the STARTpad, SET disappears; dais
tells you the time is counting do_al,
aldmugh fl_e display does not change
until one minute has passed,
When dae timer reaches
:00, die
conu'ol will beep 3 times followed by
one beep evel T 6 seconds until flae
KITCHEN TIMER ON/OFF pad is touched,
The6 secondtonecan be canceledby following
the stepsin the Specialfeatures of youroven
controlsectionunder Tones at the Endof
a timed Cycle
To Reset the timer
If fl_e display is still sho_ing dae time
remaining, you may change it by touching
dae KITCHEN TIMER ON/OFFpad, then touch
flae number pads until dm time you __nt
appears in flae display.
If fine remaining time is not in dae display
(clock, delay start or cooking time are in
flae displw), recall flae remaining dme by
touching the KITCHEN TIMER ON/OFF pad
and daen touching d_e number pads to
enter d_e new time you _nt
To Cancel the timer
Touch d=eKITCHEN TIMERON/OFF
pad twice.
Power Outage
lf a flashing timeis in thedisplay, youhave
experienced apowerfailureReset t heclock,
To reset dye clock, touch die CLOCK pad
Enter dye correct time of day by touching
d_e appr'opriate number pads Touch the
START pad.. 15