GE Appliances GSD4410 Owner's Manual page 26

Before you call for service...
Troubleshooting 17ps
What To Do
Cloudiness on
Combination of soft
glassware
water and too much
detergent
Water temperature
entering the dishwasher
exceeds 150°F.
This is called etching and
if; permanent. To prevent
this fi-om happening, use
less detergent
if you have
soft water. Wash glassware
i]_ the shortest cycle that
will get them dean.
Lower tile water heater
temperature.
Black orgray Aluminmn uteItsils have Remove marks with a mild,
marks on dishes rubbed against dishes abrasive cleaner.
Yellow or brown film
Tea or coffee stains Remove the stain by hand,
on inside surfaces using a soludon of l/2 cup
hleach and 3 cups warm
water.
WARNING
l_f*n e cleaning inte=ior
wait at least 20 minutes
after a cTcle tbr the
heating element to cool
down. Failure to do so can
zesuh in hums.
Whitefilm oninside
surfaces
An overall yellow or
brown
film can be caused
by iron deposits in water
Hard water minerals
• A special filter in the watel
supply line is the only way
to correct dais problem.
Contact
a water softener
conlpany.
• I'o clean the inteAor, apply
dish_r+ksher detergent to a
damp sponge. Wea_
robber gloves. Do not use
anytype of deanser othel
than (lish_sheJ detergent
h('( _lllS_" it nlay cittlSO
limming or sudsii_g.
26