GE Appliances GSD4410 Owner's Manual page 25

Dishes don't dry Low hflet water
temperature
Rinse agent dispenser
is empty
Dishes and flatware Inlet water temperature
not clean is below
120 °F.
Water pressure is
temporarily low
Air gap is clogged
Improper rack loading
What To Do
Make sure inlet _ atez
telnpci-at LIFe is ( Ol l't!( 1.
Check the rinse agent
dispenser.
" Raise flae watm heatm
temperature to 120°F.
Turn
on a faucet.
Is water
coming out more slowly
than usual? lfso, _ait until
pressure is normal betbre
using your dishwasher.
Clean the air gap.
Make sure large dishware
does not block the
detergent dispenser or die
wash allll.
Spotsandfilming
onglassesand
qatware
Extremely hard water
Low inlet water
temperature
Overloading the
dishwasher
Improper loading
Old or damp powder
detergent
Rit kse agent dispenser
empty
Too little detergent
To remove stubborn spots
flom glasswme:
I Remove
all metal
utensils fiom the
dish_sher.
2 Do not add dete+gent.
3 Select tile longest Qtle.
4 Start the dishwasher and
allow to ixm iPl 18 to 22
minutes. Dishwasher will
now lYe in Om main _=tsh.
5 Open the door and pour
2 cups (,7)00 till) of white
\inegal into the
bottonl of
the dishwasher.
6 Close the door and allo_
to complete tile Qcle.
Ifvintrgal rinse doesn't
\_olk: Rt:peal as above,
ex(t'pt use
1/I cup (till
lll]}
ol( ilia( at M ( l)stals
inst(ad ot vinegal.
25