Using The Dishwasher; Usinga Rinseagent - GE Appliances GSD4410 Owner's Manual

Using the dishwasher.
Checkthe Water Temperature
The entenng water must be at least 120 ° F. and not more than
150°F., for effective cleaning and to prevent dish damage. Check
the water temperature _ith a candy or nleat thel_lometer. Tuna on
the hot water faucet nearest the dishwasher, place the thelTnometer
in a glass and let the water run continuously into the glass until the
temperature stops rising. Adjust your water heater, if needed.
Usinga RinseAgent
A rinse agent, such as JEt-DRY, makes _ter flow off the dishes
quickly thereby reducing water spotting.
Fill the rinse agent dispenser
until it reaches the bottom of lip
inside the opening. Replace cap.
To check ifdnse agent is needed,
remove the cap and look into the
dispenser. On some models, the
dispenser can be checked by
pressing the clear center of the
Jill (ap 2 ol 3 times. If nnse agent
fills the center of the fill cap, you
have enough.
A fulldispensershou/dlastabout3months.
If rinse agent spills, wipe it up immediately It can keep your detergent
from working.
16