GE Appliances GSD4410 Owner's Manual page 22

Before you call for service...
i Troubleshooting -tips
Review the charts on the following pages h?st and you may not
. need to carl for service,
Possible Causes What To Do
Controlpanel lights go Time too long between Ead_ pad must be touched
off when yau're setting touching of selected pads within 30 seconds of the
controls
others. To relight, touch
any pad again, or unlock
and relatch door.
The wordAUTO doesn't
The sensor is clogged TIT using the below steps
appear in the display or faulty to deal tim sensor:
I Remove all metal
utensils flom die
dishwasher.
2 DO NOTADD DETERGENT
3 Select POTS PANSQ'c]e
and ENERGY SAVER DRY
OFF.
4 Su_rt the dishwasher and
allow to nm until the
time remaining in the
o/de appears in the
display.
5 Then open dm door and
pour l/4 cup at ciwic
acid cx)'stals into the
bottom of the
dishwasher. (Most
drugstores caw/ciuic
ackl crystals. If yours
doesn't, call GE &.z'dcc
and Parts Centers.)
6 Close die door and allow
die dishwasher to
(om])lete the ode.
I[ tilt! ploblent continues
all fi)t seP,'ice,
Dishwasher won?run
Fuse is blown, or the
circuit breaker tripped
Replat e fuse or it.set
(il (tlil t)l_;ikcl ¸. RcIII(I\ ('
ally other _l!)])|i_tt/( t'_ II (nil
die ( il( uit.
" ll?, rescuing the displa}
panel.
22