GE Appliances GSD4410 Owner's Manual page 13

E2
RESET
g3
RESET
What It Means What To Do
Drain is blocked. This
indicates that the drain
is so dogged that the
dishwasher cannot
continue to operate in
a satisfactory manner.
Dishwasher will stop.
Press the RESETpadto stop the beep.
Locate and remove file blockage in the
drain system, To pump any remaining
water out of the machine:
1 Latch the door.
2 Select any cycle.
3 Touch STARTand then immediately
touch RESET.
NOTE:Warranty service does not
cover household dxn,in problems.
Drain sensor is not
functioning.
Dishwasher will
continue cycle along
with a fLxed drain period.
It [3 repeats for the next Qcle, call
tor selwice.
There is too much water
in the dishwasher.
Press the RESETpad to stop the beep.
The dishwasber is designed to
automatically pump out extra water as
long as the door is latched. _,_n e n you
hear the motor stop running:
I Unlatch the door and see if all the
WaIer iS golle.
2 If you see water entering the
dishwasber, close and latch die door.
Shut oil the water supply to the
disbwasher.
3 If water is gone and no water is
cnlcling the dishwasher, restart Q'clc.
4 I1 'r-el repeaL% shutoffthewater
supply lo the dishwasher, Call tor
SeI_qCe.
13