Marantz SR-14mkII User Manual page 23

SYSTEM SETUP 1/2
S S Y T E M
V C R 1 O U T
T A P E O U T
D I G . O U T
_
T V A U T O
O S D I N F O
S . P . C .
6 C H I N P U T
_
D I G I T A L 6
R E T U N R N E X T
VCR1 OUT : Select the video source from the VCR1 output with <
or > button for video and audio dubbing to the VCR1
deck.
The source is switched in the following sequence.
SOURCE TV
SOURCE
To determine each source, display the desired
source and press the ^ or
TAPE OUT : Select the audio source from the TAPE output with <
or > button for audio dubbing to the tape deck. The
source is switched in the following sequence.
SOURCE TUNER
....
To determine each source, display the desired
source and press the < or > button.
DIG. OUT : Select the digital source from the DIGITAL output
with < or > button for digital dubbing to a CD-R
recorder or MD deck.
The source is switched in the following sequence.
SOURCE DIG.1
OFF SOURCE
To determine each source, display the desired
source and press the ^ or
TV AUTO: This product is equipped with a TV-auto ON/OFF
system, which automatically turns on or off the SR-
14mkII power 1 second (for ON) and up to to 5
minutes (for OFF) after the TV video input signal is
present or absent.
Switch the TV AUTO ON/OFF function to enable or
disable with or button. To use this function, connect
the TV video input to TV tuner's video output.
OSD Info : If you select enable, SR-14mkII will display the
status of the feature (Volume up/down, input select,
etc..) on the TV monitor.
But if you do not desire this information , select
"DISABLE ".
S.P.C. : System Power Control : If you select "ENABLE", the
SR-14mkII will output a power On/Off command for
a CD player, MD player, or DVD player, from the
remote output terminal.
If you have corresponding marantz products , you
can turn them on/off simultaneously with SR-14mkII.
6CH. INPUT: 6 channel direct inputs on the SR-14mkII share the
front channel of the desired source.
Select the desired source with < or > button.
DIGITAL 6 : The input of the Digital 6 terminal is commonly used
with an AC-3 RF input or Coaxial Digital Input.
If Digital 6 is connected to the AC-3 RF output of a
LD player, select " RF " with < or > button.
If you desire to connect this terminal to the digital
output of a CD player, DVD player, SAT tuner or
etc... . select " COAXIAL ".
S E T U P 1 / 2
: S O U R C E
: S O U R C E
: S O U R C E
: D I S A B L E
: E N A B L E
: D I S A B L E
:
O F F
:
R F
E X I T
LD DVD DSS/VCR2
.....
button.
v
CD CD-R/MD SOURCE
DIG.2 DIG.3 DIG.4
button.
v
SYSTEM SETUP 2/2 (ASSIGNABLE DIGITAL INPUT)
Six digital inputs can be assigned as the desired source.
Use this menu to set the SR-14mkII for connected equipment and
type of connection.
C D
T A P E
C D
T V
L D
D V D
V C R 1
D S S
R E
Example:
When the digital output of a DVD player is connected to Digital 4
AUX
(input jack) of the SR-14mkII and an AC-3 RF output and optical
digital output from a LD player are connected to AC-3 RF(Dig.6) and
Dig.1.
1. Move the cursor on the DVD with ^ or
DIGITAL4 with <, > button.
2. Move the cursor on the "LD" with ^ or
< button, and select DIGITAL1 with > button.
(Move the cursor with ^ or
Notes
• The TUNER and AUX are fixed to the analog input, and cannot
be selected for any digital input.
The RF input is available for LD , and can be linked with Digital
1,2,3 ,4 or 5.
If the RF input is linked with any Digital input, once the RF signal
is not supplied, the SR-14mkII will switch from the RF input to the
digital input automatically.
• If you connect an LD player, you should connect not only the RF
output (if it has one) but also the Digital output.
Laser Discs which are not encoded with Dolby Digital will then
send the sound through the digital output (PCM audio). If the
disc you are playing is old and doesn't have a digital soundtrack,
you must connect the L/R analog outputs on the laser disc player
to the laser disc analog inputs on the SR-14mkII.
• When a DTS-LD or DTS-CD is playing, this setup is not available.
This is to avoid noise being generated from the analog input.
In this case, the DTS audio must be played through the player's
digital output to the digital input on the SR-14mkII. This is
because the DTS soundtracks replace the standard PCM
soundtracks on DTS discs.
• The SR-14mkII does not switch from digital input to analog input
or vice versa automatically.
In case both digital and analog inputs are connected to the SR-
14mkII,if you desire to switch to analog input temporarily, you
can do so by pressing the A/D button.
• If you select "Digital-6: COAXIAL" in Setup 1/2. RF is not
available in this page.
16
S S Y T E M S E T U P 2 / 2
: A N A L OG
: A N A L OG
_
R : A N A L OG
: A N A L OG
: R F D I G I T A L 1
:
D I G I T A L 4
:
A N A L OG
:
A N A L OG
T U N R E X I T
button, and select
v
button, and select RF with
v
button, input is determine.)
v