Screw - Makita 6012HD Instruction Manual

Screw
Match vour bit to vour screw.
Item
I
Nominal diameter (mm)
Bit No.
I
Wood screw
I
Machine screw
I I
2.1
- 2.7 M2 - M2.6
3.1
-
4.8
M3
-
M5.5
Phillips
bits
Phillips bit No. 2-65 mm is standard
equipped. Select your screws and
nominal diameter with the chart on
the right.
No. 3
I
5.1 (13/64")
I
M6 (1/4")
Slotted bits
Unless you use
a
bit that fits properly the slot on the head
of
the screw, the slot will
be damaged and the screw will not fasten. If the bit fails to match the slot, use a
grinder or some such tool to trim the bit to fit the slot.
NOTE : Rest the tool for 15 minutes when changing battery for continuous operation.
9