Additional Safety Rules For Charger & Battery Cartridge; Additional Safety Rules - Makita 6012HD Instruction Manual

ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do not charge Battery Cartridge when temperature is
BELOW 10°C (5O0F1
or ABOVE 4OoC (104OF).
2.
Do not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do not allow anything t o cover or clog the charger vents.
4.
Always cover the battery terminals w i t h the battery cover when the battery
5. A
battery short can cause a large current flow, overheating, possible burns
receptacle.
cartridge is not used.
and even a breakdown.
(1)
Do not touch the terminals w i t h any conductive material.
(2) Avoid storing battery cartridge in a container with other metal objects such
(3) Do not expose battery cartridge t o water or rain.
ture may reach or exceed 5OoC
(122OF).
completely worn out. The battery cartridge can explode in a fire.
as nails, coins, etc.
6.
Do not store the tool and Battery Cartridge in locations where the tempera-
7. Do not incinerate the Battery Cartridge even if it is severely damaged or is
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always in an operating condition, because
it
does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
When drilling into walls, floors or wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drill into a "live" wire.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6.
Do not leave the tool running. Operate
the
tool only when hand-held.
7. Do not touch the drill bit or the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5