Drill - Makita 6012HD Instruction Manual

Drill
*Punch
a
small hole in the metal to pre-
vent the bit from skitterring when start-
ing to drill a hole.
0
Use
drill
machine oil on the bit to facilitate
ing.
.Pressing down too hard on the tool will not speed up the drilling. In fact, this undue
pressure will only serve t o damage the tip of your drill bit, decrease your drilling per-
formance and shorten the service of the tool.
0There is
a
tremendous force exerted on the tool/bit
a t
the time of hole break through.
Grip the drill firmly and exert care when the bit begins to break through the materials.
8