Speed Changeover; Fastening Torque Adjustment; Grip - Makita 6012HD Instruction Manual

Speed changeover
.To change the speed, turn the speed
change knob 180" while the drill is run-
ning. Be sure that the speed change knob
i s turned to the correct speed setting
before you begin operation. See arrow
indication. Use the right speed for the
job.
Fastening torque adjustment
Just turn the fastening torque adjust
knob on the tool in order to select any of
5 different fastening torques. Make sure
that the arrow points to the right torque
before you begin the job. Torques are
numbered from 1 to 5 in the order of
strength. Set to 5 for use as
a
drill. The
torque setting for number 5 is designed
for drilling, and to protect the motor
from burn out,
so it
can slip when
a
very
high torque is applied.
Fastening torque
adjust knob
I
Arrow
Grip
.The grip shown on the right is recom-
mended. However, grip the tool firmly
with both hands when drilling a large-
diameter hole.
10