Windows Nt Installation; Macintosh Installation - M-Audio Delta 1010 Manual

(win98) (these drivers also work in Win95). Click 'Next>'.
4. Windows will start to copy files, with a progress indicator on the screen. Once
this process completes itself, your Delta 1010 will be ready for action.
After completion of the driver installation, Windows may require you to restart
Windows. If it does request a restart, remove the Drivers CD Disk from the CD
drive and respond "Yes". The system will restart and your Delta 1010 is ready
for play.

Windows NT Installation

1. Power up your computer after physically installing the Delta 1010 interface
card.
2. Go to Start | Settings | Control Panel and double click on 'Multimedia.'
3. Click the 'Devices' tab, then click the 'Add' button.
4. "Unlisted or Updated Driver" will be highlighted at the top of the list. Click
OK.
5. The 'Install Driver' box will prompt you to insert the driver disk, and the A:
prompt will appear as the path. Insert the Drivers CD into your CD ROM
drive. Browse to your CD ROM open the Delta Series folder select the
corresponding opperating system (winNT). Click OK.
6. The "M Audio Delta Interface Card" driver will appear in the Add Unlisted or
Updated Driver dialog box. Click OK.
7. Windows NT will require you to restart your computer for the changes to take
effect. Choose "Restart Now." Upon restart, your Delta 1010 will be ready for
use.

Macintosh Installation

1. Open the System folder on your Macintosh hard drive. In the System folder,
locate the Extensions folder.
2. On you Drivers CD disk, open the Mac Delta Drivers folder. Place the
extension file "Delta 1010 Driver" in your Extensions folder by clicking on it
and dragging it to the Extensions folder.
3. If you are using a music program that uses ASIO drivers, it will also have an
ASIO folder within the application's folder. In your Mac Delta Drivers folder
you will find three Delta 1010 ASIO drivers. For Cubase versions 4.x, use the
"ASIO2 Delta1010" driver. For Metro, or earlier versions of Cubase, use the
"ASIO Delta1010v3" driver. For any music program that is not ASIO2 capable,
use the "ASIO Delta 1010" driver instead (check your program's
documentation). Place the file "ASIO Delta" in your program's ASIO folder by
clicking on it and dragging it to the ASIO folder.
4. Drag the "DeltaPanel PPC" file onto your Macintosh hard drive. You can run
the Delta Control Panel from any place that's convenient, though music
software applications that use ASIO will allow you to launch the Delta panel
from within the program. If not, we suggest creating an alias of the control
panel by highlighting it and pressing Command (Apple key)+M. Then, drag
the alias to the desktop.
8