M-Audio Delta 1010 Manual page 15

Digital recording system
Hide thumbs Also See for Delta 1010:
Table of Contents

Advertisement

WavOut 1/2 Delta-1010
WavOut 3/4 Delta-1010
WavOut 5/6 Delta-1010
WavOut 7/8 Delta-1010
WavOut S/PDIF Delta-1010
All WavOut devices allow playing a stereo audio stream to the analog hardware
outputs (for WavOut 1/2, 3/4, 5/6, 7/8), the S/PDIF hardware output (for WavOut
S/PDIF), and/or into the hardware router or mixer. Your application software
may break each of these stereo devices down further to "left" and "right" mono
devices. Therefore you may see them as "Left WavOut 1/2 Delta-1010, Right
WavOut 1/2 Delta-1010", or "Left WavOut S/PDIF Delta-1010, Right WavOut
S/PDIF Delta-1010", etc. from within your music software. Other software will
handle the outputs as stereo pairs, but allow you to pan audio left or right within
the pair.
Note that each device name begins with "WavOut." This is to remind you that
these are software devices, and not always connected directly to output
hardware.
Instead they are connected to the Delta 1010's internal
patchbay/router and may be sent to one of many destinations. For more on the
patchbay/router, see the Patchbay/Router section of the Delta Control Panel
software discussion.
MACINTOSH SOUND MANAGER INPUTS AND OUTPUTS: The Apple
Sound Manager limits the user to one stereo pair for input and one stereo pair for
output. Within your music software, the device selection when using the Sound
Manager drivers for input and output will be "Sound Manager" both for input
source and for output port.
To select the Sound Manager driver, open the Apple Menu and go to Control
Panel | Sounds. For both "Sound In"and "Sound Out," click and highlight the
Delta icon, then exit. You may select which Delta hardware stereo input pair and
stereo output pair will be used for the Sound Manager's Sound In and Sound Out
in the Delta Control Panel "Hardware Settings Page" (see section, "Hardware
Settings Page"under "Delta Control Panel"). Whichever stereo pair you select,
the software input and output device selection within your music program will
remain the same.
ASIO DRIVER INPUT DEVICES: When using the ASIO audio drivers with PC
or Macintosh music programs that support ASIO-style audio, the input devices
are displayed as mono devices. Within ASIO software applications, the names
of the Delta 1010 audio input devices are:
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents