Scanning Trunked Systems; Scanning Conventional Systems; Scan Lockout; Scan Revert - Kenwood TK-780 Instruction Manual

■

Scanning Trunked Systems

When scanning trunked systems, the revert groups and the groups not locked
out of the scanning sequence are scanned. See "GROUP SCAN", below.
■

Scanning Conventional Systems

When scanning conventional systems, the revert groups and the groups not
locked out of the scanning sequence are scanned. See "GROUP SCAN",
below.
■

Scan Lockout

If a programmable auxiliary key is programmed with Scan Del/Add, each
system can be locked out of the scan sequence manually. The delete
indicator (o o o o o ) will appear in the display when the selected system is locked
out.
■

Scan Revert

You can select revert systems and groups using the System and Group
keys.
Three types of Scan Reverts which can be programmed by your dealer are
available:
• Last Called Revert: The last system/ group received is assigned as the
new revert system and group.
• Last Used Revert: The last system/ group responded to is assigned as
the new revert system and group.
• Selected: The last system/ group selected is assigned as the new revert
system and group.

GROUP SCAN

Group Scan is available for both trunked and conventional systems. This feature
is useful when more than one group is programmed in a system. Group Scan is
set by your dealer on request. It scans the revert groups as well as groups that
are allowed to be scanned.
When a call is received, the group indicator shows the group number, and that
group becomes the revert group. Simply press the PTT switch to respond to the
call.
You can also perform Group Scan while using a priority channel. Please contact
your dealer for information concerning Priority Scan.
11