Table of Contents
Advertisement
Copying
D
Set the scanning position for the back of the original. Press [↑] or [↓] to set
the top or bottom position. Press [←] or [→] to set the left or right position.
Then press [OK].
E
Place the originals, and then press the {Start} key.
Note
❒ If you have incorrectly set the position, readjust with [↑], [↓], [←] or [→] .
2
❒ If you don't need to set the scanned position of the back of the original in
D
step
❒ The scanning position for the back is valid only when you are copying 2-
sided originals.
96
, press [OK] and go to step
E
.
Advertisement
Table of Contents
