Center/Border Erase (Different Width) - Lanier LD1110 Operating Instructions Manual

Center/Border Erase (different width)

This mode erases both the center and edge margins of the original image.
A
Press [Edit].
B
Press [Erase Cntr/Brdr].
C
Press [Different Width].
D
Press the key for the order you want to change and set an erase width with
[n] and [o].
Pressing [n] or [o] changes the width in increments of 1 mm (0.1 inch).
Pressing and holding down the relevant key changes the width in increments
of 10 mm (0.4 inch).
If you select to erase the image on the back of the original, press [2 Sided Set-
ting] and [Back].
Erasing the image on the back is valid when you copy 2-Sided originals.
E
Press [OK].
F
Place the originals, and then press the {Start} key.
Copier Functions
2
103