Lanier LD1110 Settings Manual page 28

Connecting the Machine
Heading
File Transfer
File Transfer
1
File Transfer
Note
❒ [IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.52 "Interface Settings"
p.62 "File Transfer"
IEEE 802.11b (wireless LAN)
This section describes necessary set items for sending e-mail with IEEE 802.11b
(wireless LAN).
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
20
Setting Item
Program/Change/
Delete E-mail Message
Scanner Resend Interval Time
Number of Scanner Resends
Setting Item
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
LAN Type
Permit SNMPv3 Communication
Permit SSL/TLS Communication
Host Name
Communication Mode
SSID Setting
Channel
Setting Requirements
As required
As required
As required
Setting Requirements
Mandatory
Mandatory
As required
As required
As required
As required
Mandatory
Mandatory
As required
As required
As required
Mandatory
As required
As required