Lanier LD1110 Settings Manual page 27

Heading
File Transfer
File Transfer
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒ When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.52 "Interface Settings"
p.62 "File Transfer"
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for sending e-mail with IEEE 1394 in-
terface cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/IEEE 1394 IPv4 Address
interface settings/IEEE 1394 DDNS Configuration
interface settings/IEEE 1394 Host Name
interface settings/IEEE 1394 Domain Name
interface settings/IEEE 1394 WINS Configuration
interface settings/IEEE 1394 IPv4 over 1394
interface settings/Network
interface settings/Network
interface settings/Network
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
Setting Item
Scanner Resend Interval Time
Number of Scanner Resends
Setting Item
IPv4 Gateway Address
DNS Configuration
Effective Protocol
SMTP Server
SMTP Authentication
POP before SMTP
Reception Protocol
POP3/IMAP4 Settings
Administrator's E-mail Address
E-mail Communication Port
Network Settings
Setting Requirements
As required
As required
Setting Requirements
Mandatory
As required
As required
As required
As required
Mandatory
Mandatory
As required
Mandatory
Mandatory
As required
As required
As required
As required
As required
As required
1
19