Table of Contents
Advertisement
Making machine settings from an application
To make the machine settings for a specific application, open the [Printer Proper-
ties] dialog box from that application. The following example describes how to
make settings for the WordPad application that comes with Windows NT 4.0:
Note
❒ The actual procedures you should follow to open the [Printer Properties] dialog
box may vary depending on the application. For more information, see the
documentation that comes with the application you are using.
❒ Any settings you make in the following procedure are valid for the current
application only.
A A A A
On the [File] menu, click [Print].
The [Print] dialog box appears.
B B B B
Select the machine you want to use in the [Name] list box, and then click
[Properties].
The [Document Properties] dialog box appears.
C C C C
Make any settings you require and click [OK].
D D D D
Click [OK] to start printing.
Printer Properties Settings
Make the settings for this machine, such as the paper size for Paper Feed Tray,
and the availability of options (Type A only).
Note
❒ In this section, the setting items peculiar to this machine are explained. For
other setting items, see the documentation that comes with Windows NT 4.0
or Help.
[Device Settings] tab
Click the item to be set. A change setting box will appear on the bottom of the
[Properties] window and you can make a setting.
❖ ❖ ❖ ❖ [Form To Tray Assignment]
Paper sizes can be assigned to Paper Feed Tray. Normally, they are not set.
You can also select "Not Available".
Windows NT 4.0
1
19
Advertisement
Table of Contents
