Rear Panel Controls And Functions - Samson Carbon 49 Owner's Manual

Rear Panel Controls and Functions

1. POWER Switch - Slide this switch to turn the keyboard on and off.
2. USB Connection - Connect a standard USB cable from this port to the USB con-
nection on a computer or iPad to provide power to the keyboard, as well as to
send and receive MIDI data.
3. MIDI OUT - Use a 5-pin MIDI cable to connect the Carbon 49 to an external MIDI
device.
4. SUSTAIN Pedal Input - Connect a ¼" sustain or expression pedal to this input. This
input is preset from the factory to send MIDI sustain (CC #64) messages. The SUS-
TAIN pedal input can be assigned to send different MIDI parameters in Edit Mode
(see p.14 for more information).
10
4 3 2 1