Installing The Air Baffle - IBM System x3650 M4 Type 7915 Installation And User Manual

Installing the air baffle

The following illustration shows how to install the air baffle.
To install the air baffle, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Make sure that the server and peripheral devices are turned off (see "Turning
3. Remove the cover (see "Removing the cover" on page 54).
4. Make sure that PCI riser-card assembly 1 is removed if it is in long position and
5. Align the air baffle with the two slots on both sides of chassis.
6. Lower the air baffle into place.
7. Install PCI riser-card assembly 1, if needed (see "Installing a PCI riser-card
Attention:
the server. Operating the server with the air baffle removed might damage server
components.
58
System x3650 M4 Type 7915: Installation and User's Guide
Air baffle
on page 40.
off the server" on page 28) and that all power cords and external cables are
disconnected.
sitting on the air baffle (see "Removing a PCI riser-card assembly" on page 55).
assembly" on page 56.
For proper cooling and airflow, replace the air baffle before you turn on
PCI riser-card
assembly 2
PCI riser-card
assembly 1