IBM System x3650 M4 Type 7915 Installation And User Manual page 100

10. Install the RAID adapter in the connector on the PCI riser card (see "Installing
11. Connect the SAS signal cables to the connectors on the RAID adapter:
82
System x3650 M4 Type 7915: Installation and User's Guide
SAS signal cables
8. Touch the static-protective package that contains the RAID adapter to any
unpainted metal surface on the server. Then, remove the RAID adapter from
the package.
9. Remove the PCI riser-card assembly 1 (see "Removing a PCI riser-card
assembly" on page 55).
a PCI adapter" on page 60).
Attention: Incomplete insertion might cause damage to the server or the
adapter.
a. Connect a SAS signal cable to the RAID adapter connector for drive bays
0-3.
b. Connect another SAS signal cable to the other SAS connector for drive
bays 4-7.
Connector for Connector for
drive bays 0-3 drive bays 4-7
signal cable signal cable
RAID adapter