IBM System x3650 M4 Type 7915 Installation And User Manual page 118

6. Slide the tape-drive assembly most of the way into the tape-drive bay.
7. Connect the SAS signal cable and the power cable to the back of the tape
8. Slide the tape-drive assembly the rest of the way into the tape-drive bay.
9. Push the latch to the closed (locked) position.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 135.
100
System x3650 M4 Type 7915: Installation and User's Guide
Tape drive
power cables
drive.
Attention: Make sure that all the cables are positioned underneath the
tape-drive assembly before you insert the assembly in the tape-drive bay.
Otherwise, the cables might be damaged.
SATA tape
drive signal
cable