Installing An Optional Tape Drive - IBM System x3650 M4 Type 7915 Installation And User Manual

16. If you removed any fans, install them.
17. Insert the hard disk drives and the fillers the rest of the way into the bays.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 135.

Installing an optional tape drive

The IBM System x3650 M4 RDX-DDS internal enablement kit is used to install an
IBM tape drive in an IBM System x3650 M4 server. The IBM System x3650 M4
RDX-DDS internal enablement kit is compatible only with the following tape drives:
v IBM DDS Generation 5 (DDS/5) SATA tape drive
v IBM DDS Generation 6 (DDS/6) USB tape drive
v IBM RDX USB Removable Hard Disk Drive
The RDX-DDS internal enablement kit contains the following components:
v One tape enablement tray
v One SAS signal cable (for USB tape drive only)
v One tape drive power cable
v Four M3 x 6 screws
The following illustration shows how to install an optional tape drive.
98
System x3650 M4 Type 7915: Installation and User's Guide
SAS/SATA
power cable