Sleep Timer - Runco 3Dimension D-113d Installation & Operation Manual

• Choose Frame Packing to have the 3Dimension Processor decode frame packed
data into left and right eye data. In this mode, the DHD Controllers do not perform any
3D processing.
Reverse Eyes: By default, the Primary and Secondary DHD Controllers are dedicated to
"left eye" and "right eye" image processing respectively. To reverse this relationship,
choose Reverse Eyes from the 3D Processing menu and set it to On.
Select Sleep Timer from the Main Menu to turn off the D-113d after a specified interval.
Press or to select Off, 30 Minutes, 60 Minutes, 90 Minutes, 2 Hours or 4 Hours.
Then, press ENTER.
D-113d Projection System Installation/Operation Manual 75
Operation

Sleep Timer

Sleep Timer
Off
30 Minutes
60 Minutes
90 Minutes
2 Hours
4 Hours