Installation; Remote Control; Notes On Batteries - Runco 3Dimension D-113d Installation & Operation Manual

Installation must be performed by a qualified custom video
Note
installation specialist. Due to the weight, size and complexity of the
D-113d Projection System, two persons are recommended for
some of the procedures described here.
To install batteries in the remote control:
1. Press down the tab on the cover and
pull the cover in the direction of the
arrow.
2. Insert the included batteries. Ensure
that the polarities correctly match the
and markings inside the battery
compartment.
3. Insert the lower tab of the cover into
the opening, and press down the cover
until it clicks in place.
• Make sure that the battery polarities are correct when installing the batteries.
• Do not mix an old battery with a new one or different types of batteries.
• If you will not use the remote control for a long time, remove the batteries to avoid
damage from battery leakage.
• Do not expose batteries to excessive heat such as from sunshine, fire or the like.
D-113d Projection System Installation/Operation Manual 21

3. Installation

3.1

Remote Control

Notes on Batteries

Installation