Specifications; D-113D Projector Specifications - Runco 3Dimension D-113d Installation & Operation Manual

Table 7-1 lists the D-113d projector specifications.
Table 7-1. D-113d Projector Specifications
Projector Type:
Native Resolution:
Illumination System:
Lamp Life:
Glasses:
Aspect Ratios:
DTV Compatibility:
3D Support:
Picture Size (16:9 Screen,
2D)
Picture Size (16:9 Screen,
3D)
Processing:
Control Options:
Inputs:
Video Standards:
Calibration:
Throw Distance
(Factor x Screen Width):
Horizontal & Vertical Offset:
D-113d Projection System Installation/Operation Manual
Texas Instruments Digital Light Processing™ (DLP) dual
imaging system, SuperOnyx™ DMD™
Full HD 1920 x 1080 (1080p)
Four (4), 350W HPM lamps; Individually swappable while
projector is in operation
1,300 hours typical
Ships with 6 pairs of PreciseColor by Panavision™ 3D System
passive glasses
Refer to Table 7-2
480i, 480p, 576i, 576p, 720p, 1080i 50/60, 1080p 24/50/60
All HDMI 1.4a mandatory 3D formats are supported with
included Runco 3Dimension Processing system
Recommended Width: 120 - 348 in.
Maximum Width: 480 in.
Recommended Width: 96 - 190 in.
Maximum Width: 254 in.
Runco 3Dimension Processor with ViVix IV™ technology and
BRiC (Backup, Recovery and Clone) tool
• Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
Refer to Table 7-2
NTSC, PAL, SECAM, CEA-861D
ISF Certified Calibration Configuration
Refer to Table 3-3
Refer to Table 3-4

7. Specifications

125
Specifications
7.1
D-113d Projector
Specifications