Jeep Grand Cherokee User Manual page 93

Transfer Ongoing Call Between Handset And Vehicle
• During an on-going call, touch the Transfer soft-key on the Phone main screen to
transfer an on-going call between handset and vehicle.
Common Phone Commands (Examples)
• "Call John Smith"
• "Call John Smith mobile"
• "Dial 1 248 555 1212
• "Call Emergency"
• "Call Towing Assistance"
• "Redial"
Phonebook
• Uconnect ® radios will automatically download your phonebook from your paired
phone, if this feature is supported by your phone. Entries are updated each time
that the phone is connected. If your phone book entries do not appear, check the
settings on your phone. Some phones require you to enable this feature manually.
• Your phonebook can be browsed on your radio screen, but editing can only be done
on your phone. To browse, touch the Phone soft-key, then the Phonebook soft-key.
• Favorite phonebook entries can be saved as Favorites for quicker access. Favorites
are shown at the top of your main phone screen.
Voice Command Tips
• Using complete names (i.e; Call John Doe vs. Call John) will result in greater
system accuracy.
• You can "chain" commands together for faster results. Say "Call John Doe,
mobile", for example.
• If you are listening to available voice command options, you do not have to listen
to the entire list. When you hear the command that you need, press the
button on the steering wheel, wait for the beep and say your command.
Changing The Volume
• Start a dialogue by pressing the Phone button
example - "Help".
• Use the radio VOLUME/MUTE rotary knob to adjust the volume to a comfortable
level while the Uconnect
Uconnect is different than the audio system.
®
NOTE:
To access help, press the Uconnect
say "help." Touch the display or push either
to cancel the help session.
ELECTRONICS
system is speaking. Please note the volume setting for
®
® Phone
, then say a command for
button on the steering wheel and
or button and say "cancel"
91