Adaptive Cruise Control (Acc) - Jeep Grand Cherokee User Manual

OPERATING YOUR VEHICLE
SET
• With the Speed Control on, push and release the SET+ or SET- button to set a
desired speed.
• Once a speed has been set a message CRUISE CONTROL SET TO MPH/KM will
appear indicating what speed was set. An indicator CRUISE will also appear and
stay on in the instrument cluster when the speed is set.
Accel/Decel
• Once a speed is set, pushing the SET + button once or the SET – button once will
increase or decrease the set speed approximately 1 mph (1 km/h).
• Push and hold the SET + button to accelerate in 5 mph (10 km/h) increments or
push and hold the SET – button to decelerate in 5 mph (10 km/h) increments;
release the button to save the new set speed.
Resume
• To resume a previously selected set speed in memory, push the RES button and
release.
Cancel
• Push the CANCEL button, or apply the brakes to cancel the set speed and
maintain the set speed memory.
• Push the ON/OFF button to turn the system off and erase the set speed memory.

ADAPTIVE CRUISE CONTROL (ACC)

• If your vehicle is equipped with adap-
tive cruise control the controls operate
exactly the same as the normal (fixed
speed) cruise control with one differ-
ence. You can set a specified distance
you would like to maintain between
you and the vehicle in front of you.
• If the ACC sensor detects a vehicle
ahead, ACC will apply limited braking
or acceleration automatically to main-
tain a preset following distance, while
matching the speed of the vehicle
ahead.
• If the sensor does not detect a vehicle ahead of you, ACC will maintain a fixed set
speed.
ACC ON/OFF
• Push and release the Adaptive Cruise Control (ACC) ON/OFF button.
• ACC READY will appear on the instrument cluster to indicate the ACC is on.
29