Jeep Grand Cherokee User Manual page 21

• The recline switch, located on the out-
board side of the seat, controls seat-
back adjustment.
• The power seat
forward/back,
adjustment.
Power Lumbar
• Push the switch forward to increase
the lumbar support. Push the switch
rearward to decrease the lumbar sup-
port.
• Pushing upward or downward on the
switch will raise and lower the position
of the support.
Memory Seat
• The memory seat feature allows you to
save two different driver seating posi-
tions (excluding lumbar position), driv-
er's outside mirror, tilt/telescoping
steering column position, and radio
station preset settings. The memory
seat buttons are located on the driver's
door panel.
• Adjust all memory profile settings,
press the SET button then press 1 or 2
within five seconds.
• To program a Key Fob to the memory
position, place the ignition switch in
the LOCK position, press and release
the LOCK button on the Key Fob to be
programmed within 5 seconds of
pressing button 1 or 2.
• Place the ignition switch in the ON/
RUN position, select Remote to Memory in the Uconnect
enter Yes.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed
Key Fob.
• Refer to the Owner's Manual on the DVD for further details.
GETTING STARTED
switch controls
up/down and tilt
® system screen and
19