Jeep Grand Cherokee User Manual page 60

ELECTRONICS
• When you press the Voice Command
you will hear a beep. After the beep, give your command. If you do not know what
commands to say, you can say "help" and the system will provide options to you.
If you ever wish to interrupt the system while it lists options, press the Voice
Command
NOTE:
All phone oriented voice commands are accessible by first pressing the Phone Pick
Up button, not the Voice Command button. To end a call, simply press the
Phone Hang Up
serves the dual purpose of ending calls as well.
Voice Command (VR) User TIPs
• To hear available commands, press the Uconnect
say "Help". You will hear available commands for the menu displayed.
• At any time, you can say the words "Cancel" or "Help". These commands are
universal and can be used from virtually any menu. All other specific commands
can be used depending upon the active application.
• You can interrupt the system prompts at any time by pressing the Uconnect
Command button while the system is speaking. After the beep, you can say a
command.
• You can 'chain' commands together for faster results. Say "Call Joe Doe mobile",
for example.
• For best performance, adjust the rearview mirror to provide at least 1/2 in (1 cm)
gap between the overhead console (if equipped) and the mirror.
• Always wait for the beep before speaking.
• Speak normally, without pausing, just as you would speak to a person sitting a few
feet/meters away from you.
• Make sure that no one other than you is speaking during a Voice Command period.
Steering Wheel Buttons
• You can control many of your radio
features using your voice. Press either
the VR or Phone Pick Up
button on your steering wheel.
58
button, after the beep, say your command.
button. In some vehicles, the Phone Pickup
button located on the steering wheel,
Voice Command button and
®
button
Voice
®