Threading The Upper Looper - Janome CompuLock Instruction Book

1
2
2
3
3
1
3
8
7
5
6
1
2
4
15

Threading the Upper Looper

Open the looper cover.
Raise the presser foot lifter.
* Place a spool of thread on the
center spool pin.
* The points to thread for the upper
looper are marked in red.
* A convenient threading chart is
placed on the machine body
inside the looper cover.
1 Draw the thread through the
center guide from back to front.
1 Thread guide
2 Slide the thread under the top
cover thread guide third from the
right, as illustrated.
2 Top cover thread guide
3 Hold the thread at both ends and
tug gently to ensure the thread is
correctly inserted in the thread
tension unit.
3 Thread tension unit