Safety System; Threading The Machine - Janome CompuLock Instruction Book

Safety System

You can operate the machine easily and safely because of the following major safety functions.
The machine does not run when you pressed the foot control because...
1 The looper cover or side cover is opened when you start sewing.
2 Presser foot lifter is raised.
3 The needle plate is not appropriate for the chosen stitch pattern.
4 The upper looper setting dial is in the incorrect position for the chosen stitch pattern.
5 The upper knife is in the incorrect position for the chosen stitch pattern.
The above error messages will appear on the visual touch screen when you press the foot
control.
However, you can press OK key to ignore the warning and accept the upper knife position
(activated or deactivated). This may be appropriate for certain special stitches/operations.
6
7
1
5 4 2
3
10

Threading the Machine

1 Thread guide
2 Double chain looper thread
3 Lower looper thread
4 Upper looper thread
5 Right needle thread
6 Left needle thread
A convenient threading chart is
placed the machine body inside
the looper cover.
7 Threading chart
* The machine has been threaded
with 4 threads (Overlock 4) at the
factory for popular sewing.