Threading The Upper Looper - Janome AT2000D Instruction Book

x
z
q
(A)
x
w
c
t
v
y
z
c
v
(B)
e
r
r

Threading the Upper Looper

CAUTION
Turn the power switch OFF before threading the
machine.
NOTE:
Raise the presser foot lifter for easier threading.
z Draw the thread through the thread guide from back
to front: (A)
q Thread guide
NOTE:
If the thread tends to slip away from the guide while
sewing, pass the thread through both thread guide
holes as shown: (B)
x Slide the thread under the top cover thread guide as
illustrated.
w Top cover thread guide
c Pull the thread along the slit.
Using both hands, insert the thread between the
tension disks of the upper looper thread tension dial.
e Thread
r Tension disk
t Upper looper thread tension dial
v Draw the thread along the slit and pass it through the
left slit of the looper thread guide.
y Left slit of looper thread guide
22