Thread Tension (2 Threads) - Janome CompuLock Instruction Book

1
3
2
4
1
3
2
4
1
3
2
4
5 6
43
Thread Tension ( 2 threads)
(Standard stitch width)
Correct tension
Adjusting the thread tension may be required
depending on the type of fabric and thread
being used.
To begin with, select the stitch pattern key
and sew a test piece.
If the tension balance on the test piece is not
satisfactory, you can adjust the thread ten-
sion manually, as follows;
Wrong tension
The illustration shows sewing results when the
lower looper thread tension is too tight and/
or needle thread tension is too loose.
Remedy:
Loosen lower looper thread tension and/or
tighten needle thread tension.
1 Wrong side of fabric
2 Right side of fabric
3 Right needle thread
4 Lower looper thread
5 Right needle thread tension
6 Lower looper thread tension
Wrong tension
The illustration shows sewing results when the
needle thread tension is too tight and/or
lower looper thread tension is too loose.
Remedy:
Loosen needle thread tension and/or tighten
lower looper thread tension.