Threading The Upper Looper - Janome 204D Instruction Manual

Janome 204D Instruction Manual
9
1
(A)
[1]
[2]
3
[3]
www.aaasewing.com
18
1
2
3
4
5
8
6
7
(B)
2

Threading the Upper Looper

Place a spool of thread on the spool pin second
from the right.
* The points to thread for upper looper are marked
in red.
* A convenient threading chart is placed on the
machine body inside the looper cover.
[1] Draw the thread through the thread guide second
from the right from back to front.
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown.
1
Thread guide
[2] Pass the thread through the holes in the second
row from the right of thread guide plate as
illustrated.
2
Thread guide plate
[3] Pass the thread through the left side of looper
thread guide sliding the thread from right to left.
3
Looper thread guide
204D Owners Manual/ User Guide
Janome 204D serger