Page 1
Type 2 Models Type 2 Models Type 2 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
• To reduce the risk of fire, electrical shock, or motor damage, do not 10 • Troubleshooting ....15 use a solid-state speed control with this fan. Use only Hunter speed controls.
Page 3
Installer’s Choice and Optional Accessories Understanding Mounting Hunter’s patented mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on your preference: Standard or Angled mounting. A standard downrod is provided for installing your fan on a ceiling 8-9 feet high.
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45033-01 • 09/28/09 • Hunter Fan Company...
3 • Assembling the Fan for Ceilings 9 Feet or Higher Your Hunter fan comes with an optional 3” downrod extension pipe. Steps 3-1 – 3-3 If you are hanging the fan on a ceiling lower than 9 feet tall and you would like to use the enclosed optional downrod, follow Steps 4-1 –...
(Rotate the fan until you hear the notch pop into place.) Go to 5 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these Indent installation instructions. Steps 4-8 – 4-9 Allen Wrench 45033-01 • 09/28/09 • Hunter Fan Company...
5-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45033-01 • 09/28/09 • Hunter Fan Company...
6-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 6-3 Step 6-4 Canopy Step 6-5 Screw 45033-01 • 09/28/09 • Hunter Fan Company...
7 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 7-1. Your fan may include blade grommets. If your fan has grommets, Step 7-1 (Detail) insert them by hand into the holes on the blades.
8 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 8-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.
Page 12
190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. Plug Connector Detail Housing Assembly Screw 45033-01 • 09/28/09 • Hunter Fan Company...
Page 13
8-11. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl. 8-12. Screw the finial onto the threaded rod end until tight. Cover Plate Grommet Hole Finial Breakaway Connector 45033-01 • 09/28/09 • Hunter Fan Company...
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 45033-01 • 09/28/09 • Hunter Fan Company...
888-830-1326 (In Canada, call 1-866-268-1936) or Wait 30 seconds, then resume power to the fan. visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 45033-01 • 09/28/09 • Hunter Fan Company...