Page 1
Type 2 Models Type 2 Models Type 2 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
• To reduce the risk of fire, electrical shock, or motor damage, do not 10 • Operating the Remote Control and use a solid-state speed control with this fan. Use only Hunter speed Mounting the Holder ....17 controls, which are solid state.
Page 3
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
Page 4
ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42458-01 • 05/16/11 • Hunter Fan Company...
Page 5
Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Step 2-2 clean the blades. Do not use a furniture polish or any other cleaners that leave any residue, as they will damage the protective Dust Armor on the blades. Red Dot Step 2-3 42458-01 • 05/16/11 • Hunter Fan Company...
Twist the lower switch housing assembly clockwise to lock the screws in place. 3-8. Install the remaining housing assembly screw into the lower switch housing and tighten all three screws securely. Housing Assembly Screw 42458-01 • 05/16/11 • Hunter Fan Company...
Page 9
3-10. Connect the plug connectors between the black wire and the black wire with a white stripe. 3-11. Connect the plug connectors between the two white wires. Steps 3-10 – 3-11 42458-01 • 05/16/11 • Hunter Fan Company...
CAUTION: The adapter has a special coating on the threads. Do Downrod not remove this coating; the coating prevents the downrod from unscrewing. Once assembled, do not remove the downrod. Canopy Canopy Setscrew Trim Ring 42458-01 • 05/16/11 • Hunter Fan Company...
Raise the fan and align the slots in the canopy with the hooks on the 3” Wood ceiling plate. Steps 5-3 – 5-6 Screw 5-8. Place the slots over the hooks to hang the fan. Flat Washer 42458-01 • 05/16/11 • Hunter Fan Company...
CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1.
7-7. Position the receiver in the canopy so that the antenna is close to the edge of the ceiling plate for clear reception. 42458-01 • 05/16/11 • Hunter Fan Company...
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42458-01 • 05/16/11 • Hunter Fan Company...
9-2. Carefully lift the glass shade up inside the light fixture as far as it will go 9-3. Rotate the shade in a clockwise direction until it is held tightly in place by the three tabs. 42458-01 • 05/16/11 • Hunter Fan Company...
10-4. You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall. Step 10-4 42458-01 • 05/16/11 • Hunter Fan Company...
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42458-01 • 05/16/11 • Hunter Fan Company...