Page 1
Type 2 Models Type 2 Models Type 2 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
• To reduce the risk of fire, electrical shock, or motor damage, do not 7 • Completing Your Installation With use a solid-state speed control with this fan. Use only Hunter speed a Bowl Light Fixture ....12 controls, which are solid state.
Page 3
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
Page 4
ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42030-01 • 07/27/11 • Hunter Fan Company...
Page 5
Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer For Angled Ceilings: Be sure to orient the hanger bracket with the large opening toward the ceiling peak. 3” Wood Screw 42030-01 • 07/27/11 • Hunter Fan Company...
3-4. Align the slot on the ball with the tab on the hanger bracket and place the ball into the hanger bracket. Go to 4 • Wiring the Fan. Step 3-4 WARNING: Fan may fall if not assembled as directed in these installation instructions. Slot 42030-01 • 07/27/11 • Hunter Fan Company...
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42030-01 • 07/27/11 • Hunter Fan Company...
5-3. Align the holes in the canopy cover with the canopy screws. Twist the canopy cover clockwise until it locks into place, hiding the canopy screws. Hanger Screw Bracket Step 5-1 Canopy Screw Step 5-2 Step 5-3 42030-01 • 07/27/11 • Hunter Fan Company...
6 • Assembling the Blades Step 6-1 (Detail) Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.
Page 13
Connector Exceeding the wattage limit marked on the MAX wattage Detail sticker affixed to the light socket(s) may result in fire hazard or improper operation. Housing Assembly Screw 42030-01 • 07/27/11 • Hunter Fan Company...
Page 14
(included) to the light and fan Metal Disc pull chains using the breakaway connector. (You may find the breakaway connector on the end of the extra chain.) Metal Rod Glass Bowl Cover Plate Breakaway Connector Finial 42030-01 • 07/27/11 • Hunter Fan Company...
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42030-01 • 07/27/11 • Hunter Fan Company...