Hunter 23781 Owner's Manual And Installation Manual
Type 2 models
Hide thumbs
Also See for 23781:
- Installation and operation manual (16 pages) ,
- Parts manual (4 pages) ,
- Installation manual (1 page)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42609-01
20110112
©2011 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 23781
Summary of Contents for Hunter 23781
- Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42609-01 20110112 ©2011 Hunter Fan Co.
-
Page 2: Table Of Contents
• To reduce the risk of fire, electrical shock, or motor damage, do not or Without a Light Fixture ..12 use a solid-state speed control with this fan. Use only Hunter speed 8 • Operating and Cleaning Your controls. -
Page 3: Preparing The Fan Site
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. - Page 4 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42609-01 • 01/12/11 • Hunter Fan Company...
- Page 5 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42609-01 • 01/12/11 • Hunter Fan Company... -
Page 8: Assembling The Fan
Assemble securely with three low profile screws. Wire Go to 4 • Hanging and Wiring the Fan. Canopy Step 3-6 (Detail) Trim Ring Adapter Canopy Low Profile Screw Low Profile Washer Low Profile Screw 42609-01 • 01/12/11 • Hunter Fan Company... -
Page 9: Hanging And Wiring The Fan
• The black wire from the ceiling to the black wire from the fan • The black/white wire from the fan to the wire for the wall switch 4-3. Push all wires and wire connectors into the outlet box. 42609-01 • 01/12/11 • Hunter Fan Company... -
Page 10: Installing The Canopy And Canopy
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42609-01 • 01/12/11 • Hunter Fan Company... -
Page 11: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. -
Page 12: Completing Your Installation With Or Without A Light Fixture
Housing Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. - Page 13 7-7. Remove the plastic from each of the shades. Plug 7-8. Install the shades. Connector Detail 7-9. Install three B10 candelabra bulbs light bulbs (40 Watt maximum each). Light Bulb Housing Shade Assembly Screw Step 7-6 Steps 7-8 – 7-9 42609-01 • 01/12/11 • Hunter Fan Company...
- Page 14 8. Install the switch housing cap and plug button to the lower switch housing. 9. Install the lower switch housing to the upper switch housing with three screws. Light Assembly Screws Plug Button Lower Step 8 Switch Screws Housing Step 9 Step 5 42609-01 • 01/12/11 • Hunter Fan Company...
-
Page 15: Ceiling Fan
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 42609-01 • 01/12/11 • Hunter Fan Company... -
Page 16: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 42609-01 • 01/12/11 • Hunter Fan Company...