Page 1
Type 2 Models Type 2 Models Type 2 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
8 • Operating and Cleaning Your Ceiling use a solid-state speed control with this fan . Use only Hunter speed Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 controls .
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan . If you cannot check off every item, prepare a new fan site as described on this page .
Page 4
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan . If you cannot check off every item, prepare a new fan site as described on this page .
Page 5
Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease . You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting . The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods .
Parts Guide . Check for any shipping damage to the motor blade irons (if applicable) in sets, or fan blades . If any parts are missing or damaged, contact your Hunter as they were shipped . dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936) .
. Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws . Do not over tighten . Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42449-01 • 11/09/10 • Hunter Fan Company...
3-7 . Raise the fan and align the slots in the canopy with the hooks on the ceiling plate . 3-8 . Place the slots over the hooks to hang the fan . 42449-01 • 11/09/10 • Hunter Fan Company...
. 4-7 . Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box . 42449-01 • 11/09/10 • Hunter Fan Company...
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball . The tabs will flex out releasing the canopy trim ring . Ring Canopy Screw 42449-01 • 11/09/10 • Hunter Fan Company...
6 • Assembling the Blades Step 6-1 (Detail) Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan) . 6-1 . Your fan may include blade grommets . If your fan has grommets, insert them by hand into the holes on the blades .
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button . This feature gives you the option of installing the fan with OR without the included light fixture .
Page 13
. If lights do not appear to be operating properly, see the troubleshooting section . Plug Connector Detail Housing Assembly Screw 42449-01 • 11/09/10 • Hunter Fan Company...
Page 14
. (You may find the Light Bulb Sockets breakaway connector on the (B10 end of the extra chain . ) Candelabra- Based 60 Watt Maximum) Metal Disc Metal Rod Glass Bowl Cover Plate Breakaway Finial Connector 42449-01 • 11/09/10 • Hunter Fan Company...
Page 15
7-19 . Install the switch housing cap and plug button to the lower switch housing . 7-20 . Once you have uninstalled the light fixture, continue with step 7-6 . Step 7-16 Male Dummy Terminal Female Dummy Terminal Plug Button Step 7-19 42449-01 • 11/09/10 • Hunter Fan Company...
. 8-6 . The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt . Use a dry or slightly damp lint free cloth to clean the blades .
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www . h unterfan . c om . Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42449-01 • 11/09/10 • Hunter Fan Company...