Operation Instructions - Hunter ceiling fan Installation Manual

Light Kit (continued)
Install a light bulb in each socket.
Note: Globe style and number of
lights may vary.
Metal
Plate
Globe
Globe
Keeper
Finial
Cap
Finial
Press the globe and globe keeper
flush against the metal plate. Thread
the light pull chain through the hole in
the center of the finial cap and thread
the fan pull chain through the hole in
the side of the cap. Finally, thread only
the light pull chain through the hole
in the finial and screw the finial onto
the threaded rod.
M3500-01 •11/30/12 • © Hunter Fan Company
Fan
Pull
Light
Pull Chain
Chain
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
finial and finial cap. The fan pull
chain controls the speed: high,
medium, low, and off. The light
pull chain controls the light
fixture: on and off.
17
www.HunterFan.com
1.888.830.1326
See next page for fan

operation instructions.