Light Kit (continued)
Thumbscrew
Shade
To install the shade, first loosen
the thumbscrews. Raise the
shade to the light fixture. Tighten
all thumbscrews securely.
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker affixed to the light socket(s)
may result in fire hazard or improper operation.
Bulb
Install a bulb into each of
the sockets. When necessary,
replace with bulbs of the same
type and wattage.
M0080-01 • 05/14/14 • © Hunter Fan Company
Fan
Pull
Light
Chain
Pull
Chain
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
switch housing.
Note: Glass shade style and number of lights may vary.
15
www.HunterFan.com
1.888.830.1326
See next page for remote
operation instructions.