Hunter ceiling fan Installation Manual page 13

Blades www.HunterFan.com
1.888.830.1326
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You
need them for this step.
Lightly attach the blade irons to the
Insert grommets found in the hardware
motor with the blade iron armature
bag into the holes in the blades, then
screws, then securely tighten after both
secure each blade to a blade iron with
screws are attached.
screws found in the hardware bag.
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
13
M3500-01 •11/30/12 • © Hunter Fan Company