Delete Service <Service-Name; Delete Win[Dow] <Window-Name; Dev_Subtype B05Comp | Window | <Nn; Dynamic_Pri <Nnn - HP NonStop SSH 544701-014 Reference Manual

DELETE SERVICE <service-name> | *
The specified service, or all services, can be removed from the configuration.
DELETE WIN[DOW] <window-name> | *
DELETE WINDOW removes a previously added window from the configuration. Dynamic windows are automatically
deleted upon session termination. Windows created by AUTO_ADD_WIN Y are automatically deleted when all
applications using the window terminate or close the window (no longer relevant since SPR T0801^ABE where
AUTO_ADD_WIN is not supported anymore).
WIN and WINDOW are equivalent.
<window-name> specifies a window to be deleted.
* means to delete all windows, including DYNAMIC and AUTO_ADD_WIN windows.
DEV_SUBTYPE B05COMP | WINDOW | <nn>
Controls the values returned to application DEVICEINFO calls against a window.
B05COMP (default) compatibile with STN releases B05 and earlier.
no session active
6530 session active
non 6530 session
WINDOW response determined by ADD WINDOW configuration
SUBTYPE nn
(overrides TERM_TYPE)
SUBTYPE NONE and no session active, response determined by TERM_TYPE:
TERM_TYPE 6530
TERM_TYPE other
When SUBTYPE is NONE, and a session
<nn> always responds with type 6 and subtype <nn>
DYNAMIC_PRI <nnn>
Specifies the default priority used for dynamic window applications when the SERVICE does not specify PRI.
Where <nnn> is the Guardian priority in the range 1-199; default is 149.

DYN_CPU (cpu,cpu)

Sets default CPU for subsequent ADD SERVICE TYPE DYNAMIC. Default is DYN_CPU (0,15).
DYN_WIN_MAX <nnn>
The existing DYN_WIN_MAX command is generally superseded by the features of GWN^TEMPLATE (introduced in
T0801^ABE), but it is still allowed.
<nnn> is the maximum number of window names, including zero (0). <nnn> must be in the range 100 to 100000, default
is 100000. DYN_WIN_MAX may be used to reduce the number of windows allowed by GWN^TEMPLATE. For
example:
PARAM GWN^TEMPLATE #Z0000
236 • STN Reference
6,0
6,4
6,0
6,nn
6,4
6,0
is active, then B05COMP rules above are used.
HP NonStop SSH Reference Manual