Info Ssh2 - HP NonStop SSH 544701-014 Reference Manual

Parameter
LOGFILE
LOGFORMATCONSOLE
LOGFORMATFILE
LOGFORMATEMS
LOGLEVELCACHE
LOGLEVELCONSOLE
LOGLEVELFILE
LOGLEVELEMS
Please see the chapter "Monitoring and Auditing", section
parameters. The following screenshot shows how the LOGLEVELFILE is changed to 70 using the SET command:
$DATA1 TBSSH 29> run sshcom $tba00
T9000B03_02DEC2009_SSHCOM
OPEN $tba00
% set loglevelfile 70
set loglevelfile 70
OK, LOGLEVELFILE set to 70
%

INFO SSH2

The INFO SSH2 command will display the startup configuration as well as the current settings of all parameters that can
be changed using the SET command. The following screenshot shows the output of the INFO SSH2 command, after
changing the LOGLEVELFILE with the command shown above (example):
% info ssh2
info ssh2
-----------------------------------------------------------
SSH2 version T9999H06_13Mar2012_comForte_SSH2_0092
-----------------------------------------------------------
Startup configuration:
[def ] ALLOWEDAUTHENTICATIONS <keyboard-interactive,password,publickey>
[def ] ALLOWEDSUBSYSTEMS
[def ] ALLOWFROZENSYSTEMUSER <FALSE>
[def ] ALLOWINFOSSH2
[def ] ALLOWPASSWORDSTORE
[def ] ALLOWTCPFORWARDING
[def ] AUDITCONSOLE
[def ] AUDITEMS
[def ] AUDITFILE
[def ] AUDITFILERETENTION
[def ] AUDITFORMAT
[def ] AUDITFORMATCONSOLE
[def ] AUDITFORMATEMS
[def ] AUDITFORMATFILE
[def ] AUDITMAXFILELENGTH
[def ] BACKUPCPU
[def ] BANNER
[def ] CIPHERS
cbc,twofish128-cbc,blowfish-cbc,3des-cbc,arcfour,cast128-
cbc>
[def ] CLIENTALLOWEDAUTHENTICATIONS <none,gssapi-with-
mic,publickey,password,keyboard-interactive>
[def ] CLIENTMODEOWNERPOLICY <BOTH>
[def ] COMPRESSION
[def ] CONFIG
[def ] CONFIG2
[def ] CPUSET
140 • SSHCOM Command Reference
Meaning
Determines whether log messages are written to a file.
Controls the format of the log messages that are written to the console.
Controls the format of the log messages that are written to a file.
Controls the format of the log messages that are written to EMS.
Determines whether log messages are written to the internal log cache.
Determines which messages will be written to the console.
Determines which messages will be written to the log file.
Determines which messages will be written to EMS.
"Destinations for Log
<sftp,tacl>
<ALL>
<TRUE>
<FALSE>
<*>
<*>
<*>
<10>
<21>
<0>
<0>
<21>
<20000>
<NONE>
<*>
<aes256-cbc,twofish256-cbc,twofish-cbc,aes128-
<TRUE>
<>
<*>
<>
Messages" for a description of those
HP NonStop SSH Reference Manual