Installation & Quick Start
System Requirements
To run SSH2 components, associated systems must meet the following requirements:
HP NonStop host:
•
G-Series: G06.21 or later.
•
H-Series: H06.07 or later.
•
J-Series: J06.03 or later
•
OSS is not required. If present, OSS is fully supported.
Partner systems:
•
An SSH client and/or daemon supporting version 2 of the SSH protocol.
Acquiring the Product Archives
The HP NonStop SSH product is delivered with the H-series Release Version Update (RVU) H06.11 and later, or the J-
series RVU J06.03 and later. A license file is no longer required for H06.21 and later, or J06.10 and later. These releases
correspond to SPR T0801AAQ and later. For G06.32 and G06.32 based Time Critical Fix releases (TCFs), NonStop
SSH is only licensed for use with MR-Win6530 on the NonStop System Console (NSC) for secure communications with
the default IP maintenance stacks. To enable full product use you must contact your HP Sales representative for details
on licensing.
SSH2 also comes with the comForte SecurSH or SecurFTP/SSH product packages. These products require the SSH2
installation archive (SSHINST.100 or SSHINST.800, depending on the NonStop Server type) to be unpacked on the
NonStop server.
HP NonStop SSH Reference Manual
Installation & Quick Start • 31